new file mode 100644

@@ -0,0 +1,374 @@

+/**

+  ******************************************************************************

+  * @file    stm32f0xx_hal_conf.h

+  * @author  MCD Application Team

+  * @brief   HAL configuration file.

+  *

+  * @note    modified by ARM

+  *          The modifications allow to use this file as User Code Template

+  *          within the Device Family Pack.

+  ******************************************************************************

+  * @attention

+  *

+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>

+  *

+  * Redistribution and use in source and binary forms, with or without modification,

+  * are permitted provided that the following conditions are met:

+  *   1. Redistributions of source code must retain the above copyright notice,

+  *      this list of conditions and the following disclaimer.

+  *   2. Redistributions in binary form must reproduce the above copyright notice,

+  *      this list of conditions and the following disclaimer in the documentation

+  *      and/or other materials provided with the distribution.

+  *   3. Neither the name of STMicroelectronics nor the names of its contributors

+  *      may be used to endorse or promote products derived from this software

+  *      without specific prior written permission.

+  *

+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE

+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR

+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,

+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE

+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

+  *

+  ******************************************************************************

+  */ 

+

+/* Define to prevent recursive inclusion -------------------------------------*/

+#ifndef __STM32F0xx_HAL_CONF_H

+#define __STM32F0xx_HAL_CONF_H

+

+#ifdef _RTE_

+#include "RTE_Components.h"             /* Component selection */

+#endif

+

+#ifdef __cplusplus

+ extern "C" {

+#endif

+

+/* Exported types ------------------------------------------------------------*/

+/* Exported constants --------------------------------------------------------*/

+

+/* ########################## Module Selection ############################## */

+/**

+  * @brief This is the list of modules to be used in the HAL driver 

+  */

+#ifdef RTE_DEVICE_HAL_COMMON

+#define HAL_MODULE_ENABLED

+#endif

+#ifdef RTE_DEVICE_HAL_ADC

+#define HAL_ADC_MODULE_ENABLED

+#endif

+#ifdef RTE_DEVICE_HAL_CAN

+#define HAL_CAN_MODULE_ENABLED

+#endif

+#ifdef RTE_DEVICE_HAL_CEC

+#define HAL_CEC_MODULE_ENABLED

+#endif

+#ifdef RTE_DEVICE_HAL_COMP

+#define HAL_COMP_MODULE_ENABLED

+#endif

+#ifdef RTE_DEVICE_HAL_CORTEX

+#define HAL_CORTEX_MODULE_ENABLED

+#endif

+#ifdef RTE_DEVICE_HAL_CRC

+#define HAL_CRC_MODULE_ENABLED

+#endif

+#ifdef RTE_DEVICE_HAL_DAC

+#define HAL_DAC_MODULE_ENABLED

+#endif

+#ifdef RTE_DEVICE_HAL_DMA

+#define HAL_DMA_MODULE_ENABLED

+#endif

+#ifdef RTE_DEVICE_HAL_FLASH

+#define HAL_FLASH_MODULE_ENABLED

+#endif

+#ifdef RTE_DEVICE_HAL_GPIO

+#define HAL_GPIO_MODULE_ENABLED

+#endif

+#ifdef RTE_DEVICE_HAL_I2C

+#define HAL_I2C_MODULE_ENABLED

+#endif

+#ifdef RTE_DEVICE_HAL_I2S

+#define HAL_I2S_MODULE_ENABLED

+#endif

+#ifdef RTE_DEVICE_HAL_IRDA

+#define HAL_IRDA_MODULE_ENABLED

+#endif

+#ifdef RTE_DEVICE_HAL_IWDG

+#define HAL_IWDG_MODULE_ENABLED

+#endif

+#ifdef RTE_DEVICE_HAL_PCD

+#define HAL_PCD_MODULE_ENABLED

+#endif

+#ifdef RTE_DEVICE_HAL_PWR

+#define HAL_PWR_MODULE_ENABLED

+#endif

+#ifdef RTE_DEVICE_HAL_RCC

+#define HAL_RCC_MODULE_ENABLED

+#endif

+#ifdef RTE_DEVICE_HAL_RTC

+#define HAL_RTC_MODULE_ENABLED

+#endif

+#ifdef RTE_DEVICE_HAL_SMARTCARD

+#define HAL_SMARTCARD_MODULE_ENABLED

+#endif

+#ifdef RTE_DEVICE_HAL_SMBUS

+#define HAL_SMBUS_MODULE_ENABLED

+#endif

+#ifdef RTE_DEVICE_HAL_SPI

+#define HAL_SPI_MODULE_ENABLED

+#endif

+#ifdef RTE_DEVICE_HAL_TIM

+#define HAL_TIM_MODULE_ENABLED

+#endif

+#ifdef RTE_DEVICE_HAL_TSC

+#define HAL_TSC_MODULE_ENABLED

+#endif

+#ifdef RTE_DEVICE_HAL_UART

+#define HAL_UART_MODULE_ENABLED

+#endif

+#ifdef RTE_DEVICE_HAL_USART

+#define HAL_USART_MODULE_ENABLED

+#endif

+#ifdef RTE_DEVICE_HAL_WWDG

+#define HAL_WWDG_MODULE_ENABLED

+#endif

+

+/* ######################### Oscillator Values adaptation ################### */

+/**

+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.

+  *        This value is used by the RCC HAL module to compute the system frequency

+  *        (when HSE is used as system clock source, directly or through the PLL).  

+  */

+#if !defined  (HSE_VALUE) 

+  #define HSE_VALUE            8000000U  /*!< Value of the External oscillator in Hz */

+#endif /* HSE_VALUE */

+

+/**

+  * @brief In the following line adjust the External High Speed oscillator (HSE) Startup 

+  *        Timeout value 

+  */

+#if !defined  (HSE_STARTUP_TIMEOUT)

+  #define HSE_STARTUP_TIMEOUT  100U      /*!< Time out for HSE start up, in ms */

+#endif /* HSE_STARTUP_TIMEOUT */

+

+/**

+  * @brief Internal High Speed oscillator (HSI) value.

+  *        This value is used by the RCC HAL module to compute the system frequency

+  *        (when HSI is used as system clock source, directly or through the PLL). 

+  */

+#if !defined  (HSI_VALUE)

+  #define HSI_VALUE            8000000U  /*!< Value of the Internal oscillator in Hz*/

+#endif /* HSI_VALUE */

+

+/**

+  * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup 

+  *        Timeout value 

+  */

+#if !defined  (HSI_STARTUP_TIMEOUT) 

+  #define HSI_STARTUP_TIMEOUT  5000U     /*!< Time out for HSI start up */

+#endif /* HSI_STARTUP_TIMEOUT */  

+

+/**

+  * @brief Internal High Speed oscillator for ADC (HSI14) value.

+  */

+#if !defined  (HSI14_VALUE) 

+  #define HSI14_VALUE          14000000U /*!< Value of the Internal High Speed oscillator for ADC in Hz.

+                                             The real value may vary depending on the variations

+                                             in voltage and temperature.  */

+#endif /* HSI14_VALUE */

+

+/**

+  * @brief Internal High Speed oscillator for USB (HSI48) value.

+  */

+#if !defined  (HSI48_VALUE) 

+  #define HSI48_VALUE          48000000U /*!< Value of the Internal High Speed oscillator for USB in Hz.

+                                             The real value may vary depending on the variations

+                                             in voltage and temperature.  */

+#endif /* HSI48_VALUE */

+

+/**

+  * @brief Internal Low Speed oscillator (LSI) value.

+  */

+#if !defined  (LSI_VALUE) 

+  #define LSI_VALUE            40000U    

+#endif /* LSI_VALUE */                   /*!< Value of the Internal Low Speed oscillator in Hz

+                                             The real value may vary depending on the variations

+                                             in voltage and temperature.  */

+/**

+  * @brief External Low Speed oscillator (LSE) value.

+  */

+#if !defined  (LSE_VALUE)

+  #define LSE_VALUE            32768U    /*!< Value of the External Low Speed oscillator in Hz */

+#endif /* LSE_VALUE */

+

+/**

+  * @brief Time out for LSE start up value in ms.

+  */

+#if !defined  (LSE_STARTUP_TIMEOUT)

+  #define LSE_STARTUP_TIMEOUT  5000U     /*!< Time out for LSE start up, in ms */

+#endif /* LSE_STARTUP_TIMEOUT */     

+

+

+/* Tip: To avoid modifying this file each time you need to use different HSE,

+   ===  you can define the HSE value in your toolchain compiler preprocessor. */

+

+/* ########################### System Configuration ######################### */

+/**

+  * @brief This is the HAL system configuration section

+  */     

+#define  VDD_VALUE                    3300U  /*!< Value of VDD in mv */           

+#define  TICK_INT_PRIORITY            ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default)             */

+                                                                              /*  Warning: Must be set to higher priority for HAL_Delay()  */

+                                                                              /*  and HAL_GetTick() usage under interrupt context          */

+#define  USE_RTOS                     0U

+#define  PREFETCH_ENABLE              1U

+#define  INSTRUCTION_CACHE_ENABLE     0U

+#define  DATA_CACHE_ENABLE            0U

+#define  USE_SPI_CRC                  1U

+

+/* ########################## Assert Selection ############################## */

+/**

+  * @brief Uncomment the line below to expanse the "assert_param" macro in the 

+  *        HAL drivers code

+  */

+/*#define USE_FULL_ASSERT    1*/

+

+/* Includes ------------------------------------------------------------------*/

+/**

+  * @brief Include module's header file 

+  */

+

+#ifdef HAL_RCC_MODULE_ENABLED

+ #include "stm32f0xx_hal_rcc.h"

+#endif /* HAL_RCC_MODULE_ENABLED */

+

+#ifdef HAL_GPIO_MODULE_ENABLED

+ #include "stm32f0xx_hal_gpio.h"

+#endif /* HAL_GPIO_MODULE_ENABLED */

+

+#ifdef HAL_DMA_MODULE_ENABLED

+  #include "stm32f0xx_hal_dma.h"

+#endif /* HAL_DMA_MODULE_ENABLED */

+

+#ifdef HAL_CORTEX_MODULE_ENABLED

+ #include "stm32f0xx_hal_cortex.h"

+#endif /* HAL_CORTEX_MODULE_ENABLED */

+

+#ifdef HAL_ADC_MODULE_ENABLED

+ #include "stm32f0xx_hal_adc.h"

+#endif /* HAL_ADC_MODULE_ENABLED */

+

+#ifdef HAL_CAN_MODULE_ENABLED

+ #include "stm32f0xx_hal_can.h"

+#endif /* HAL_CAN_MODULE_ENABLED */

+

+#ifdef HAL_CEC_MODULE_ENABLED

+ #include "stm32f0xx_hal_cec.h"

+#endif /* HAL_CEC_MODULE_ENABLED */

+

+#ifdef HAL_COMP_MODULE_ENABLED

+ #include "stm32f0xx_hal_comp.h"

+#endif /* HAL_COMP_MODULE_ENABLED */

+

+#ifdef HAL_CRC_MODULE_ENABLED

+ #include "stm32f0xx_hal_crc.h"

+#endif /* HAL_CRC_MODULE_ENABLED */

+

+#ifdef HAL_DAC_MODULE_ENABLED

+ #include "stm32f0xx_hal_dac.h"

+#endif /* HAL_DAC_MODULE_ENABLED */

+

+#ifdef HAL_FLASH_MODULE_ENABLED

+ #include "stm32f0xx_hal_flash.h"

+#endif /* HAL_FLASH_MODULE_ENABLED */

+

+#ifdef HAL_I2C_MODULE_ENABLED

+ #include "stm32f0xx_hal_i2c.h"

+#endif /* HAL_I2C_MODULE_ENABLED */

+

+#ifdef HAL_I2S_MODULE_ENABLED

+ #include "stm32f0xx_hal_i2s.h"

+#endif /* HAL_I2S_MODULE_ENABLED */

+

+#ifdef HAL_IRDA_MODULE_ENABLED

+ #include "stm32f0xx_hal_irda.h"

+#endif /* HAL_IRDA_MODULE_ENABLED */

+

+#ifdef HAL_IWDG_MODULE_ENABLED

+ #include "stm32f0xx_hal_iwdg.h"

+#endif /* HAL_IWDG_MODULE_ENABLED */

+

+#ifdef HAL_PCD_MODULE_ENABLED

+ #include "stm32f0xx_hal_pcd.h"

+#endif /* HAL_PCD_MODULE_ENABLED */

+

+#ifdef HAL_PWR_MODULE_ENABLED

+ #include "stm32f0xx_hal_pwr.h"

+#endif /* HAL_PWR_MODULE_ENABLED */

+

+#ifdef HAL_RTC_MODULE_ENABLED

+ #include "stm32f0xx_hal_rtc.h"

+#endif /* HAL_RTC_MODULE_ENABLED */

+

+#ifdef HAL_SMARTCARD_MODULE_ENABLED

+ #include "stm32f0xx_hal_smartcard.h"

+#endif /* HAL_SMARTCARD_MODULE_ENABLED */

+

+#ifdef HAL_SMBUS_MODULE_ENABLED

+ #include "stm32f0xx_hal_smbus.h"

+#endif /* HAL_SMBUS_MODULE_ENABLED */

+

+#ifdef HAL_SPI_MODULE_ENABLED

+ #include "stm32f0xx_hal_spi.h"

+#endif /* HAL_SPI_MODULE_ENABLED */

+

+#ifdef HAL_TIM_MODULE_ENABLED

+ #include "stm32f0xx_hal_tim.h"

+#endif /* HAL_TIM_MODULE_ENABLED */

+

+#ifdef HAL_TSC_MODULE_ENABLED

+ #include "stm32f0xx_hal_tsc.h"

+#endif /* HAL_TSC_MODULE_ENABLED */

+

+#ifdef HAL_UART_MODULE_ENABLED

+ #include "stm32f0xx_hal_uart.h"

+#endif /* HAL_UART_MODULE_ENABLED */

+

+#ifdef HAL_USART_MODULE_ENABLED

+ #include "stm32f0xx_hal_usart.h"

+#endif /* HAL_USART_MODULE_ENABLED */

+

+#ifdef HAL_WWDG_MODULE_ENABLED

+ #include "stm32f0xx_hal_wwdg.h"

+#endif /* HAL_WWDG_MODULE_ENABLED */

+

+/* Exported macro ------------------------------------------------------------*/

+#ifdef  USE_FULL_ASSERT

+/**

+  * @brief  The assert_param macro is used for function's parameters check.

+  * @param  expr: If expr is false, it calls assert_failed function

+  *         which reports the name of the source file and the source

+  *         line number of the call that failed. 

+  *         If expr is true, it returns no value.

+  * @retval None

+  */

+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((char *)__FILE__, __LINE__))

+/* Exported functions ------------------------------------------------------- */

+  void assert_failed(char* file, uint32_t line);

+#else

+  #define assert_param(expr) ((void)0U)

+#endif /* USE_FULL_ASSERT */    

+    

+#ifdef __cplusplus

+}

+#endif

+

+#endif /* __STM32F0xx_HAL_CONF_H */

+

+

+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/